Interfaces for which CUDA Implementations are Provided

RandomVariable

A RandomVariableCudaFactory is provided, which can be injected in any finmath lib model/algorithm using a random variable factory to construct RandomVariable objects.

Objects created from this factory or from objects created from this factory perform their calculation on the CUDA device (GPU).

The implementation supports type priorities (see http://ssrn.com/abstract=3246127 ) and the default priority of RandomVariableCuda is 20. For example: operators involving CPU and GPU vectors will result in GPU vectors.

The RandomVariableCudaFactory can be combined with algorithmic differentiation AAD wrappers, for example RandomVariableDifferentiableAAD, to allow algorithmic differentiation together with calculations performed on the GPU. For the type priority: objects allowing for algorithmic differentiation (AAD) have higher priority, AAD on GPU has higher priority than AAD on CPU.

BrownianMotion

In addition, objects of type BrownianMotion are also taking the role of a factory for objects of type RandomVariable. Thus, injecting the BrownianMotionCuda into classes consuming a BrownianMotion will result in finmath-lib models performing their calculations on the GPU - seamlessly.

Distribution

finmath-lib-cuda-extensions is distributed through the central Maven repository. It's coordinates are:

<groupId>net.finmath</groupId>
<artifactId>finmath-lib-cuda-extensions</artifactId>

The project is currently build for Cuda 10.2. For other Cuda versions use the Maven command line property cuda.version set to one of 8.0, 9.2, 10.0, 10.1, 10.2 and the Maven classifyer cuda-${cuda.version}.

Example

Create a vector of floats on the GPU device

RandomVariable randomVariable = new RandomVariableCuda(new float[] {-4.0f, -2.0f, 0.0f, 2.0f, 4.0f} );

perform some calculations (still on the GPU device)

randomVariable = randomVariable.add(4.0);
randomVariable = randomVariable.div(2.0);

perform a reduction on the GPU device

double average = randomVariable.getAverage();

or get the result vector (to the host)

double[] result = randomVariable.getRealizations();

(note: the result is always double, since different implementation may support float or double on the device).

RandomVariableFactory

A better approach is to use a RandomVariableFactory instead of a constructor. You may then write your program in terms of the RandomVariableFactory interface:

RandomVariableFactory randomVariableFactory = new RandomVariableCudaFactory();

and then

RandomVariable randomVariable = randomVariableFactory.createRandomVariable(new float[] {-4.0f, -2.0f, 0.0f, 2.0f, 4.0f} );

If you write your code in terms of the RandomVariableFactory interface you may easily switch your implementations by using one of the following factories:

• RandomVariableCudaFactory - CUDA vectors running on an CUDA device (GPU).
• RandomVariableFromArrayFactory - Java floating point array (single or double precision).
• RandomVariableDifferentiableAADFactory - Endowing any of the above with adjoint algorithmic differentiation.

Installation / Build

Binary distribution is available via Maven central.

You have to have NVIDIA Cuda 10.1 installed. The Maven configuration comes with profiles for Cuda 8.0, 9.2, 10.0 and 10.1. If you like to use a different version, you can try to switch the JCuda version by setting the property cuda.version on the Maven command line.

To build the project yourself and run the unit tests from the source repository:

Obtain the finmath-lib-cuda-extensions source

git clone https://github.com/finmath/finmath-lib-cuda-extensions.git
cd finmath-lib-cuda-extensions

...then build the code.

mvn clean package

This will build the version using Cuda 10.2. For Cuda 10.1 use

mvn -Dcuda.version=10.1 clean package

If everything goes well, you will see unit test run. Note that some of the tests may fail if the device (GPU) has not enough memory.

Trying more

You may turn on logging using -Djava.util.logging.config.file=logging.properties. To try different configurations you may use

• -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceType=GPU -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceIndex=0
• -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceType=CPU -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceIndex=0
• -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceType=GPU -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceIndex=1

for example

mvn clean install test -Djava.util.logging.config.file=logging.properties -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceType=GPU -Dnet.finmath.montecarlo.opencl.RandomVariableOpenCL.deviceIndex=1

You may run dedicated tests using

• -Dtest=RandomVariableGPUTest
• -Dtest=MonteCarloBlackScholesModelTest
• -Dtest=LIBORMarketModelCalibrationATMTest
• -Dtest=LIBORMarketModelCalibrationTest

The last tests are computationally heavy Monte-Carlo interest rate models. The test may fail on devices that lack sufficient memory.

Trying on Amazon EC2

If you do not have a machine with NVidia Cuda 10.0 at hand, you may try out the finmath-lib-cuda-extensions on an Amazon EC2 machine. To do so:

• Create an Amazon AWS account (if needed) an go to your AWS console.
• Select to start an EC2 virtual server.
• Launch a GPU instance
  • Filter the list of images (AMI) using gpu and select - e.g. - Deep Learning Base AMI (Ubuntu) Version 19.0.
  • Filter the list of servers using the "GPU instances" and select an instance.
• Login to your GPU instance.
• Check that you have cuda 10.0 (e.g. use nvcc --version)
• Try finmath-lib-cuda-extensions as described in the previous section.

Performance

Unit test for random number generation:

Running net.finmath.montecarlo.BrownianMotionTest
Test of performance of BrownianMotionLazyInit                  	..........test took 49.057 sec.
Test of performance of BrownianMotionJavaRandom                	..........test took 65.558 sec.
Test of performance of BrownianMotionCudaWithHostRandomVariable	..........test took 4.633 sec.
Test of performance of BrownianMotionCudaWithRandomVariableCuda	..........test took 2.325 sec.

Unit test for Monte-Carlo simulation

Running net.finmath.montecarlo.assetderivativevaluation.MonteCarloBlackScholesModelTest
BrownianMotionLazyInit                    calculation time =  4.00 sec   value Monte-Carlo =  0.1898	 value analytic    =  0.1899.
BrownianMotionJavaRandom                  calculation time =  5.19 sec   value Monte-Carlo =  0.1901	 value analytic    =  0.1899	.
BrownianMotionCudaWithHostRandomVariable  calculation time =  2.50 sec   value Monte-Carlo =  0.1898	 value analytic    =  0.1899.
BrownianMotionCudaWithRandomVariableCuda  calculation time =  0.09 sec   value Monte-Carlo =  0.1898	 value analytic    =  0.1899	.

Remark:

• BrownianMotionLazyInit: Calculation on CPU, using Mersenne Twister.
• BrownianMotionJavaRandom: Calculation on CPU, using Java random number generator (LCG).
• BrownianMotionCudaWithHostRandomVariable: Calculation on CPU and GPU: Random number generator on GPU, Simulation on CPU.
• BrownianMotionCudaWithRandomVariableCuda: Calculation on GPU: Random number generator on GPU, Simulation on GPU.

Unit test for LIBOR Market Model calibration

There is also a unit test performing a brute force Monte-Carlo calibration of a LIBOR Market Model with stochastic volatility on the CPU and the GPU. Note however that the unit test uses a too small size for the number of simulation paths, such that the GPU code is no improvement over the CPU code. The unit test shows that CPU and GPU give consistent results.

The performance of a brute-force Monte-Carlo calibration with 80K and 160K paths are given below. Note: if the number of paths is increased, the GPU time remains almost the same (given that the GPU has sufficient memory), while the CPU time grows linearly. This is due to the fact that the GPU performance has a large part of fixed management overhead (which will be reduced in future versions).

The CPU version was run on a an Intel i7-7800X 3.5 GHz using multi-threadded calibration. THe GPU version was run on an nVidia GeForce GTX 1080.

LMM with 81,920 paths

Running net.finmath.montecarlo.interestrates.LIBORMarketModelCalibrationTest

Calibration to Swaptions using CPU    calculation time = 364.42 sec    RMS Error.....: 0.198%.
Calibration to Swaptions using GPU    calculation time =  49.46 sec    RMS Error.....: 0.198%.

(LIBOR Market Model with stochastic volatility, 6 factors, 81920 paths)

LMM with 163,840 paths

Running net.finmath.montecarlo.interestrates.LIBORMarketModelCalibrationTest

Calibration to Swaptions using CPU    calculation time = 719.33 sec    RMS Error.....: 0.480%.
Calibration to Swaptions using GPU    calculation time =  51.70 sec    RMS Error.....: 0.480%.

(LIBOR Market Model with stochastic volatility, 6 factors, 163840 paths)

Profiles for Other Cuda Versions

The default profile will build the version using Cuda 10.2.

Cuda 11.1

For Cuda 11.1 use

mvn -Pcuda-11.1 clean package

or

mvn -Dcuda.version=11.1 clean package

Cuda 11.0

For Cuda 11.0 use

mvn -Pcuda-11.0 clean package

or

mvn -Dcuda.version=11.0 clean package

Cuda 10.1

For Cuda 10.1 use

mvn -Pcuda-10.1 clean package

or

mvn -Dcuda.version=10.1 clean package

Cuda 10.0

For Cuda 10.0 use

mvn -Pcuda-10.0 clean package

or

mvn -Dcuda.version=10.0 clean package

Cuda 9.2

For Cuda 9.2 use

mvn -Pcuda-9.2 clean package

or

mvn -Dcuda.version=9.2 clean package

Cuda 8.0

For Cuda 8.0 use

mvn -P cuda-8.0 clean package

or

mvn -Dcuda.version=8.0 clean package

Cuda 6.0

For Cuda 6.0 use

mvn -P cuda-6.0 clean package

or

mvn -Dcuda.version=6.0 clean package

For Cuda 6.0 the jcuda binaries are not unpacked automatically and have to be installed manually. Set LD_LIBRARY_PATH (*nix environment variable) or java.library.path (Java system property) to the jcuda platform specific binaries.

References

• finmath lib Project documentation provides the documentation of the library api.
• finmath lib API documentation provides the documentation of the library api.
• finmath.net special topics cover some selected topics with demo spreadsheets and uml diagrams. Some topics come with additional documentations (technical papers).

License

The code of "finmath lib", "finmath lib opencl extensions" and "finmath lib cuda extensions" (packages net.finmath.*) are distributed under the Apache License version 2.0, unless otherwise explicitly stated.